|
|
Download the Product Catalog (PDF) |
|
NEW RELEASE!
|
|
AX02 Kosmic Kicker
AX02 Kosmic Kicker is an accelerator for all House of Kolor Urethane products. AX02 can be used to reduce dry times on small parts that need to be handled sooner to increase production. A good example of this products usefulness would be for a motorcycle project where the coats of Kandy and Klear could be accelerated for quicker sanding and addition of artwork later that day. AX02 is not a cure all for a cold shop and should not be used on larger projects such as a complete car.
| Download Technical Datasheet |
English |
|
|
|
|
ACCELERATOR (AX01)
This potent curing aid is used to speed dry time in cool shops on parts that
must be handled (sanded for art layouts) or recoated the same day. ACCELERATOR
can be added to any of the following Kosmic Kolor products (UC1, UFC1, UC35,
UFC35, UFC19 Klears, UB and UFB Solid Colors, and UK Kandys) to speed up cure time.
|
|
|
ADHERTO® AP01 ADHESION PROMOTERS
To ensure proper adhesion of automotive paint to: plastics, metals, chrome, or a variety
of other surfaces use our ADHERETO® adhesion promoter. ADHERETO®
can also be used for between coat adhesion, when one paint has dried or for difficult
sanding situations. Ready to spray right out of the can (no reduction required). Clear
in color. AP01 for most plastics and metals.
|
|
|
FLAKES (F, MF, and UMF)
House of Kolor flakes are the best money can buy. They are
ultra-thin, easier to smooth out and have tremendous sparkle!
Add them to any of our clears or Kandys for some additional
flash. Available in an array of colors, and three different
sizes: a standard coarse flake, a fine mini flake and an even
finer ultra-mini flake.
|
|
|
FLATTENING AGENT (FAO1)
FA01 is designed to reduce the gloss of our acrylic lacquer
and polyurethane enamel topcoats and clears. FA01 will not
effect adhesion or hardness. You can vary the amount of gloss
reduction (from 10% to 99%) depending on the amount of FLATTENING
AGENT used. FA01 is great for undercarriages, frames and
engine parts where high gloss is not desired, but a tough,
durable finish is.
|
|
|
HI-HEAT BLACK (HH04)
Great for engine parts, exhaust systems, or anywhere high
temperatures is a concern. Hi-heat Black is manufactured with
the most technologically advanced ingredients available. It
features hi-build, fast coverage, and cures to a beautiful
semi-gloss jet black finish that will endure 1400°F with
no flaking or discoloration. Comes ready-to-spray, requiring
no reduction. Parts are dry enough to handle in one hour with
no baking required.
|
|
|
ICE PEARLS™ (IP)
Ice Pearls glass flake pigments go beyond what traditional
pearls offer in vibrance, brilliance, and sparkle–especially
under sunlight conditions. Ice Pearls™ can be used with
any of our SHIMRIN® bases, Kandys, Klears, or Kustom bases
to give a brilliant glitter effect.
|
|
|
INTENSIFIER KANDY KONCENTRATE (KK)
Use to enrich any of our Kosmic Kolor Urethane Enamel Kandys
or Kustom Kolor Acrylic Lacquer Kandys. Our intensifiers reduce
the number of coats required to color match an exterior finish.
Works great on door jambs, under the hood and in trunk areas.
Is also great for small parts, and motorcycles, when time
is a factor. Can also be used with SG100 or our lacquer clears
for multi-colored artwork.
|
|
|
INTERCOAT BARRIER CLEAR (USG100)
Think of it as an intercoat clear on steroids, USG100 Intercoat
Barrier Clear is designed specifically for use as a highly
productive and protective clear for artwork tape-outs on Shimrin®
Basecoats - it prevents permanent tape markings and protects
metallic surfaces when artwork is planned, better than any
intercoat on the market. USG100 Barrier Clear also speeds
up the painting process with its accelerated curing speed -
guaranteed to please the serious painter!
USE ONLY WHEN TOP COATING WITH URETHANE ENAMEL
MUST BE TOP COATED WITH UCC01, UFC19, UFC35, UMC35 OR UC35
| Download Technical Datasheet |
English |
|
|
|
|
KAMELEON® OPALS (KOP SERIES)
Kameleon Opals represent some of the latest advancements in pearlescent technology
allowing radical color shift from different viewing angles when sprayed over black
and darker colors. These colors can also provide an opalescent effect when sprayed
over white and lighter colors. These products are available as easy dispersing
powders that can be added to clears, pearl base coats, and Marblizer® to create
dazzling effects and exciting new colors.
|
|
|
KAMELEON® PEARLS (KPF)
The color changing effect of Kameleon® Pearls are just as dramatic as the
Kameleon™ Base coats Available in four color changing pigments, they are
in dry form and may be added to SG-100 Intercoat Clear or any of our acrylic
lacquer or urethane clears. The pearls can make a vehicle appear to be different
colors to people looking at it from different angles. Use these pearls to add
an exciting flare to your artwork.
|
|
|
KOLOR SHIFT FLAKES (F74, F75 & F76)
House of Kolor¨ found a way to apply Kameleon® technology to a flake's
surface, creating a completely new flake effect. The flakes give an even crisper
color shift than you'll see in a liquid, and the geometry of the flakes cause
the colors to move through three or four phases. They're also very light and
spray easier than your typical flake, so when used with SG150 Intercoat Pearl
and Flake Karrier, you’ll be pleased with how they apply and thrilled with the final finish.
- • F74 - Green to Purple
- • F75 - Blue to Red
- • F76 - Gold to Green
|
|
|
KOSMIC KANDY KARRIER (UC25)
Kosmic Kandy Karrier UC25 is a 2.1 VOC product that meets the VOC's
for SCAQMD Rule 1151 and SJVAQMD Rule 4602 & 4612 Phase II
compliancy. UC25 is designed to be used as a karrier for our KK
Koncentrates to duplicate our UK Kandy Kolors over our Shimrin®
Base Coats. UC25 is medium solids, 30% solids as applied, and has
the same application properties as our conventional UK Kandy's. UC25
features excellent clarity. It has excellent weathering and ultraviolet resistance.
| Download Technical Datasheet |
English |
|
|
|
|
KOSMIC KONVERTOR (KV1)
KV1 Kosmic Konvertor is an additive for Shimrin® base coats
and was developed to effectively lower the VOC's of House of
Kolor's Shimrin® Base Coats to meet the VOC limits of 3.5
lb / gal voc for SCAQMD Rule 1151 and SJVAQMD Rule 4602 &
4612 Phase II. This is accomplished by using low molecular weight
urethane resins and exempt solvents thereby increasing the solids
of our Shimrin® base coats and lowering the VOC to 3.5 lbs.
/ gal. or lower.
| Download Technical Datasheet |
English |
|
|
|
|
KOSMIC KROME® (MC SERIES)
Kosmic Krome® represents the application of revolutionary chemistry
where platelets of metal can be created at smaller, more uniform sizes
than ever before. When applied properly these platelets form a film
that gives a chrome-like appearance. These films offer custom painters
effects previously unavailable and open a wide array of possibilities
for new colors when combined with other effect colors currently available.
Kosmic Krome kustom metals are one of the latest effects for kustom
painting. Not intended to be a total finish, but rather an additional
tool for graphics or airbrush projects that need something unique.
Available in a variety of colors that can bring a plated look to any project.
|
|
|
KOSMIC LONG-GLO™ (KLG)
The KLG series or Kosmic Long-Glo™ products offer stunning glow
in the dark effects for longer periods of time than the original KG
or Kosmic Glo® series of glow in the dark powders. The Kosmic
Long-Glo™ series is available in 4 oz. jars and is ideal for
adding effect to your graphics to make them shine. Note: not recommended
for overall refinishing.
|
|
|
PEARL CONCENTRATES (DP, DR, PP)
These pearl concentrates may be added to any of our acrylic lacquers or
urethane enamels, or to first coats of kandys when shooting over solid
color bases. They are available in paste or dry form in an array of
colors. Use them to design your own one of a kind custom paint job.
|
|
|
STRIPING & LETTERING URETHANE ENAMELS (U)
Our Striping & Lettering enamels are specially designed for striping, lettering,
and airbrush artwork. They feature high pigmentation, low solids for a minimal edge,
and long open time. Apply over existing finishes or topcoat for a smooth, durable finish.
|
|
|
TRANSLUCENT FLAKES (F70 SERIES)
Built from ultra thin polyester, our flakes are the lightest and easiest
to use. Now in four new retro-translucent colors, these Translucent
Flakes are the newest addition to our family of color shift flakes. The
translucent nature of these flakes allow for use over a greater range
of base colors, including white resulting in a greater shift effect.
These Translucent Flakes seem to disappear and shift colors as they are
viewed from different angles making for a spectacular kustom effect.
|
