|
| |
Prep/Undercoat |
|---|
| |
Download the Product Catalog (PDF) |
|
|
WAX & GREASE REMOVER (KC10)
KC10 removes grease, wax, silicone, adhesives, tar, tree
sap, insects and dirt. It is a fast flashing product designed
to help speedup initial surface preparation before beginning
sanding and body work.
|
|
|
POST SANDING CLEANER (KC20)
KC20 removes sanding residue as well as dirt and light contaminants, such as hand oil. KC20 is designed for use after KC10 and final
surface preparation.
|
|
|
KWIKURE EPOXY PRIMER (KP21)
KP21 is a 2.1 VOC hi-solids catalyzed Epoxy Primer that meets
all current air quality regulations. It is designed to be
the first primer applied to bare steel, aluminum, fiberglass,
magnesium and galvanized surfaces. It's strong adhesion, hi-build,
excellent durability, and corrosion resistance make it the
logical choice for the base of a long lasting paint job.
|
|
|
CHROMATE FREE EPOXY PRIMER (KP2CF)
KP2CF is designed to work over properly prepared aluminum, magnesium,
fiberglass, galvanized steel, OEM finishes, and some woods and plastics.
It's strong adhesion, fast build, and ease of sanding (wet
or dry), make it a logical choice for the base of a lasting
paint job. It may also be applied to repair areas for fast
filling touchups.
|
|
|
KO-SEAL® PRIMER SEALER (KS)
A two-component acrylic urethane primer sealer. KO-SEAL® II
has two series of products: one series meeting the VOC requirements
for National Rule, and one series meeting the VOC requirements
for SCAQMD Rule 1151. KO-Seal® is easy to sand and is available
in black, white and metallic colors.
|
|
|
BLEED CHECK SEALER (SBS10)
A two-component acrylic urethane sealer designed to stop bleed
through. It stops bleeding colors from interfering with graphics
and artwork. The following House of Kolor products have a tendency to bleed: KBC05, KBC10, KK05, KK10, UK05, UK10, and UK13. We recommend using Bleed Check Sealer over these products to protect artwork.
|
|
|
DIRECT TO METAL PRIMERS & ACTIVATORS (KD2000 & KDA2000 SERIES)
KD2000 Direct to Metal Primer has been formulated with a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding. These primers emit very low amount of Volatile Organic Chemicals (VOCs), Hazardous Air Polluting Solvents (HAPS), and contain no isocyanates. KD2000 may be applied to properly cleaned and sanded aluminum, steel, galvanized steel, sand blasted steel, fiberglass and SMC. Can be reduced up to 10% with RU reducer. Mix 4 parts KD2000 to 1 part KDA2000 to 1 part RU Series Reducer (for 2.1 VOC, RU300 must be used).
|
|
|
KCA100 AEROSOL CLEANER
KCA100 Aerosol Surface Cleaner dissolves surface contaminants rapidly. With it's convenient aerosol application, KCA100 increases productivity.
Benefits of KCA100 Aerosol Cleaner:
• Dissolves a wide variety of organic contaminants
• Works longer to dissolve contaminants
• Convenient ready-to-use application
• Nationwide compliance |
|
|
