| |
Download the Product Catalog (PDF) |
|
|
INTENSIFIER KANDY KONCENTRATE (KK)
Use to enrich any of our Kosmic Kolor Urethane Enamel Kandys
or Kustom Kolor Acrylic Lacquer Kandys. Our intensifiers reduce
the number of coats required to color match an exterior finish.
Works great on door jambs, under the hood and in trunk areas.
Is also great for small parts, and motorcycles, when time
is a factor. Can also be used with SG100 or our lacquer clears
for multi-colored artwork.
|
|
|
FLAKES (F, MF, and UMF)
House of Kolor flakes are the best money can buy. They are
ultra-thin, easier to smooth out and have tremendous sparkle!
Add them to any of our clears or Kandys for some additional
flash. Available in an array of colors, and three different
sizes: a standard coarse flake, a fine mini flake and an even
finer ultra-mini flake.
|
|
|
INTERCOAT BARRIER CLEAR (USG100)
Think of it as an intercoat clear on steroids, USG100 Intercoat Barrier Clear is designed specifically for use as a highly productive and protective clear for artwork tape-outs on Shimrin® Basecoats - it prevents permanent tape markings and protects metallic surfaces when artwork is planned, better than any intercoat on the market. USG100 Barrier Clear also speeds up the painting process with its accelerated curing speed - guaranteed to please the serious painter!
USE ONLY WHEN TOP COATING WITH URETHANE ENAMEL
MUST BE TOP COATED WITH UCC01, UFC19, UFC35, UMC35 OR UC35
| Download Technical Datasheet |
English |
Spanish |
|
|
|
KOLOR SHIFT FLAKES (F74, F75 & F76)
House of Kolor¨ found a way to apply Kameleon® technology to a flake’s surface, creating a completely new flake effect. The flakes give an even crisper color shift than you’ll see in a liquid, and the geometry of the flakes cause the colors to move through three or four phases. They’re also very light and spray easier than your typical flake, so when used with SG150 Intercoat Pearl and Flake Karrier, you’ll be pleased with how they apply and thrilled with the final finish.
- • F74 - Green to Purple
- • F75 - Blue to Red
- • F76 - Gold to Green
| Download Technical Datasheet |
English |
Spanish |
|
|
|
TRANSLUCENT FLAKES (F70 SERIES)
Built from ultra thin polyester, our flakes are the lightest and easiest to use. Now in four new retro-translucent colors, these Translucent Flakes are the newest addition to our family of color shift flakes. The translucent nature of these flakes allow for use over a greater range of base colors, including white resulting in a greater shift effect. These Translucent Flakes seem to disappear and shift colors as they are viewed from different angles making for a spectacular kustom effect.
| Download Technical Datasheet |
English |
Spanish |
|
|
|
PEARL CONCENTRATES (DP, DR, PP)
These pearl concentrates may be added to any of our acrylic
lacquers or urethane enamels, or to first coats of kandys
when shooting over solid color bases. They are available in
paste or dry form in an array of colors. Use them to design
your own one of a kind custom paint job.
|
|
|
ICE PEARLS™ (IP)
Ice Pearls glass flake pigments go beyond what traditional
pearls offer in vibrance, brilliance, and sparkle–especially
under sunlight conditions. Ice Pearls™ can be used with
any of our SHIMRIN® bases, Kandys, Klears, or Kustom bases
to give a brilliant glitter effect.
|
|
|
KAMELEON® OPALS (KOP SERIES)
Kameleon Opals represent some of the latest advancements in pearlescent technology allowing radical color shift from different viewing angles when sprayed over black and darker colors. These colors can also provide an opalescent effect when sprayed over white and lighter colors. These products are available as easy dispersing powders that can be added to clears, pearl base coats, and Marblizer® to create dazzling effects and exciting new colors.
| Download Technical Datasheet |
English |
Spanish |
|
|
|
KAMELEON® PEARLS (KPF)
The color changing effect of Kameleon® Pearls are just
as dramatic as the Kameleon™ Base coats Available in
four color changing pigments, they are in dry form and may
be added to SG-100 Intercoat Clear or any of our acrylic lacquer
or urethane clears. The pearls can make a vehicle appear to
be different colors to people looking at it from different
angles. Use these pearls to add an exciting flare to your
artwork.
|
|
|
KOSMIC KROME® (MC SERIES)
Kosmic Krome® represents the application of revolutionary chemistry where platelets of metal can be created at smaller, more uniform sizes than ever before. When applied properly these platelets form a film that gives a chrome-like appearance. These films offer custom painters effects previously unavailable and open a wide array of possibilities for new colors when combined with other effect colors currently available. Kosmic Krome kustom metals are one of the latest effects for kustom painting. Not intended to be a total finish, but rather an additional tool for graphics or airbrush projects that need something unique. Available in a variety of colors that can bring a plated look to any project.
| Download Technical Datasheet |
English |
Spanish |
|
|
|
KOSMIC LONG-GLO™ (KLG)
The KLG series or Kosmic Long-Glo™ products offer stunning glow in the dark effects for longer periods of time than the original KG or Kosmic Glo® series of glow in the dark powders. The Kosmic Long-Glo™ series is available in 4 oz. jars and is ideal for adding effect to your graphics to make them shine. Note: not recommended for overall refinishing.
| Download Technical Datasheet |
English |
Spanish |
|
|
|
STRIPING & LETTERING URETHANE ENAMELS (U)
Our Striping & Lettering enamels are specially designed
for striping, lettering, and airbrush artwork. They feature
high pigmentation, low solids for a minimal edge, and long
open time. Apply over existing finishes or topcoat for a smooth,
durable finish.
|
|
|
ACCELERATOR (AX01)
This potent curing
aid is used to speed dry time in cool shops on parts that
must be handled (sanded for art layouts) or recoated the same
day. ACCELERATOR can be added to any of the following Kosmic
Kolor products (UC1, UFC1, UC35, UFC35, UFC19 Klears,
UB and UFB Solid Colors, and UK Kandys) to speed up cure time.
|
|
|
ADHERTO® (AP01 and AP02) ADHESION PROMOTERS
To ensure proper
adhesion of automotive paint to: plastics, metals, chrome,
or a variety of other surfaces use our ADHERETO® adhesion promoter.
ADHERETO® can also be used for between coat adhesion, when
one paint has dried or for difficult sanding situations. Ready
to spray right out of the can (no reduction required). Clear
in color. Available in two formulas: AP01 for most plastics
and metals, and AP02 for polyethylene only.
|
|
|
FLATTENING AGENT (FAO1)
FA01 is designed to reduce the gloss of our acrylic lacquer
and polyurethane enamel topcoats and clears. FA01 will not
effect adhesion or hardness. You can vary the amount of gloss
reduction (from 10% to 99%) depending on the amount of FLATTENING
AGENT used. FA01 is great for undercarriages, frames and
engine parts where high gloss is not desired, but a tough,
durable finish is.
|
|
|
HI-HEAT BLACK (HH04)
Great for engine parts, exhaust systems, or anywhere high
temperatures is a concern. Hi-heat Black is manufactured with
the most technologically advanced ingredients available. It
features hi-build, fast coverage, and cures to a beautiful
semi-gloss jet black finish that will endure 1400°F with
no flaking or discoloration. Comes ready-to-spray, requiring
no reduction. Parts are dry enough to handle in one hour with
no baking required.
|
